Enter Your Email Address Here

Okuma machine M code List









Okuma machine M-codes List:-

  • M00    Program Stop
  • M01    Optional Stop
  • M02    End of Program
  • M03    Spindle CW
  • M04    Spindle CCW
  • M05    Spindle Stop
  • M06    Tool Change
  • M08    Coolant ON
  • M09    Coolant OFF
  • M12    Machine Spindle STOP
  • M13    Machine Spindle CW
  • M14    Machine Spindle CCW
  • M15    C-Axis Positioning
  • M16    C-Axis Positioning (NEG)
  • M17    CEJ MATIC :Request of Data transfer
  • M18    Post-process Gauging RS232C: Request of Data transfer
  • M19    Oriented Spindle Stop
  • M20    Tailstock Barrier OFF or spindle interference monitoring OFF (opposed two- spindle models)
  • M21    Tailstock Barrier ON or spindle interference monitoring ON (opposed two-    spindle models)
  • M22    Chamfer OFF
  • M23    Chamfer ON
  • M24    Chuck Barrier OFF, Tool interference OFF
  • M25    Chuck Barrier ON, Tool interference ON
  • M26    Thread Lead Along Z-Axis
  • M27    Thread Lead Along X-Axis
  • M28    Tool Interference Check Function OFF
  • M29    Tool Interference Check Function ON
  • M30    End of Program
  • M32    Straight In-feed along thread face mode (on left face)
  • M33    Zigzag in feed in Thread Cutting
  • M34    Straight In-feed along thread face mode (on right face)
  • M40    Spindle gear Range Neutral
  • M41    Spindle Gear Range 1
  • M42    Spindle Gear Range 2
  • M48    Spindle Speed Override Ignore Cancel
  • M49    Spindle Speed Override Ignore
  • M55    Tailstock Spindle Retract
  • M56    Tailstock Spindle Advanced
  • M58    Chucking Pressure Low
  • M59    Chucking Pressure High
  • M72    ATC Unit Position at Approach Position
  • M73    Thread Cutting Pattern 1
  • M74    Thread Cutting Pattern 2
  • M75    Thread Cutting Pattern 3
  • M76    Parts Catcher Retract
  • M77    Parts Catcher Advanced
  • M78    Steady Rest Unclamp
  • M79    Steady Rest Clamp
  • M80    Over cut Advanced
  • M81    Over cut Retract
  • M83    Chuck Clamp
  • M84    Chuck Unclamp
  • M85    No Return to the Cutting Starting Point after the completion of rough                      turning cycle (LAP)
  • M86    Turret Indexing direction: CW (reverse)
  • M87    Cancel of M86
  • M98    Tailstock Spindle Thrust Low
  • M99    Tailstock Spindle Thrust High
  • M109 Cancel of M110
  • M110 C-Axis Joint
  • M134 Z-Axis Thrust Monitoring OFF
  • M135 Z-Axis Thrust Monitoring ON
  • M136 Designation of Multiple fixed cycle configuration
  • M137 Touch setter interlock release ON
  • M138 Touch setter interlock release OFF
  • M139 Lead Machining Function - Learning Operation
  • M140 Tapping Cycle M-Tool Constant Rotation Answer Ignored
  • M141 C-Axis Clamp or not Selection
  • M142 Coolant Pressure Low
  • M143 Coolant Pressure High
  • M146 C-Axis Unclamp
  • M147 C-Axis Clamp
  • M152 M-Tools Spindle Interlock ON
  • M153 M-Tools Spindle Interlock OFF
  • M161 Feedrate Override Fix (100%)
  • M162 Cancel of M163
  • M163 M-Tools Spindle Speed Override Fix (100%)
  • M168 Ignoring M-Tool Spindle Constant Speed Answer
  • M169 C-Axis NoClamp
  • M191 M-Tool Spindle Orientation Direction Specified CW
  • M192 M-Tool Spindle Orientation Direction Specified CCW
  • M197 Thread Cutting Phasing Stroke Clear
  • M211 Keyway Cutting Style: Minus Direction
  • M212 Keyway Cutting Style: Zigzag
  • M213 Keyway Cutting Style: Designated Depth Infeed
  • M214 Keyway Cutting Style: Equal Depth Infeed


Followers

Face book

Twitter Delicious Facebook Digg Stumbleupon Favorites More